|
The steering
system depends so much on tires, so make sure your mower wear the correct ones
Lawnmower tires are different from riding on and walk behind lawnmowers. Tires depend on which mower
model you have and what kind of terrain you will work
with.Lawnmower tires also depend on the kind
of mower traction, the shape drawn on the tire surface
or whether or not tires will be plastic with an inner
tube.
Everything should be clearly understood, however if there
are any questions, you could check with your nearest dealer
or manufacturer.
Recommended tires for different terrains
Recommended
tires for riding and walk behind lawn mowers
are tires which have long wearing with a high rubber to
void ratio. Extremely gentle to the turf yet providing
more traction. With lawn mowers, ribbed tires can also
be used. Using these lawn mower tires, a minimal turf damage
is produced but there is not much traction. Lawn mower
tires are divided up into different types:
- The
classic rib tires are specially designed to reduce turf
damage. They are an excellent front end tire, sporting
a long-lasting high performance rating.
- Classic TX which makes it easier to mow and is a rugged
tire designed to take abuse. The classic TX also has more
traction than a standard tire. Frequent trips are safer
with the wide footprint that provides more stability under
heavy loads.
- Multi Trac C/S lawnmowers tire. This tire features a unique
bevelled shoulder, turf friendly tread and flat footprint,
making the C/S the longest wearing turf traction tire
in the industry. Over 50 sizes available in rim sizes
from 6" to 20".
- Smooth tire used where traction is not necessary. This
tire is recommended for its superior puncture resistance
and minimal turf damage. This ribbed tire is very gentle
and is ideal for use as a front tire for a lawn tractor
.
- Studded. This 2 way traction for this special lawn
mower tires design offers versatility for use on
residential riding mowers as well as for many industrial
applications.
Best tips for garden tractor tires
 Most garden tractor tires depend on the function and design of mechanically front wheel driven tractors. Individual circumstances could exist and they will would cause irregular or rapid front tire wear.
The front tractor tires are normally smaller than the rear drive tires. They are designed to run at an overspeed of 1% to 5% over that of the rear tires in order to obtain maximum contribution of the front drive axle.
15" x 6" front and 20" x 8" rear wheels yardman lawn tractor
 
To improve tire wear, it is recommended that the tires be rotated in an x pattern when the right front tire is approximately 50% worn or at 250 hours, whichever comes first. When the tires are x rotated, the tire lug pattern will be pointing in the opposite direction from original. This will even out irregular wear if it was present.
Tires must have an excellent traction as well as resistance to lateral sway. All these features are needed in order to obtain a smooth driving.
Load distribution for garden tractor tires
Garden tractor tires are usually designed to carry a specified load at a specific inflation pressure. Proper inflation for the load being carried is basically the most important for optimum tires performance. Use an accurate gauge to check inflation pressure.
Even though the tires may still be operable, consider replacing the tire if we feel loss of traction, a major change in operating conditions or unusual tread wear.
Another important thing to keep in mind when we carry load is to check tractor for proper load distribution. Generally a 40% front / 60% rear weight distribution ratio is recommended. Follow the recommendations given in the tractor operator's manual.
A bad load distribution can become in a problem. That problem usually creates conditions under which the front drive tires could wear at about twice the rate of the rear tires. If a garden tractor exhibits irregular or rapid front tire wear, read carefully operator's manual on the garden tractor tires section.
load distribution by John Deere
Tractor tire care
The tires are an investment and they have to be cared for. Apart from the basic tire care of keeping the required inflation, the tractor tires require careful handling as the terrain in which they work is rough uneven and slippery. The following precautions in use of tires will prolong the life of tires.
-
When the tractor is working, avoid the rim slippage for the rear tires. Rim slippage may pull out the valve tube and make the tire inoperative
-
The weight distribution on both tires on same axle should be same. Unusual tire wear would result if these precautions were not taken. Ensure that tire pressure is same for two tires on same axle.
-
Ensure that the tires are never stand on oily area, nor they are stored in oily areas. Tires absorb oil and leach out the protecting chemicals from within the tires.
-
Do not carry out any welding near tires. Apart from the possibility of fire, the ozone released from welding (or from electric generators, and motors) damages the tires.
-
When you tractor is lying idle in winter season, make it a point to remove at least the rear tires from the tractor and store them horizontally. The damage resulting from low pressure due to low atmospheric temperature could make them unfit for use.
-
In winter, if you cannot remove the rear tires, ensure that the inflation pressures are maintained and during the ensuing summer the air from tires are released in a timely manner so as not to cause tire burst. Tire burst can cause accident and injury.
| 
