Solve the lawn mower troubleshooting problem
Lawn mower troubleshooting is not so easy, there are so many possible causes that can solve complaints of out lawnmower. Our readers must know that safety is basically the most important, so before attempting any repair, shut off engine and disconnect spark plug. We will try to repair basic problems that our lawnmower could have, but keep in mind that we are not mechanics, maybe some readers are, normally we will not be, therefore do have special care when attempting to do any work with machines. Please, do not try to fix the problem by your own if you notice that your lawn mower has weird behavior or any lawn mower troubleshooting that we are not sure form where it comes, just go to your local service center.
Troubleshooting on manual shift/gear drive riding mowers
Be as it is lawn mowers problem, take a look in owner’s manual. First lawn mower troubleshooting of the article happens when mower is not driving. Possible causes could be either the automatic drive disconnect lever is in push mode, or clutch out of adjustment, and also could be that the axle key is missing. In order to solve and fix these possible problems, just make sure the automatic drive disconnect lever is in drive mode or just try by replacing axle key. For axle problem, we must adjust clutch and problem will be solved. Another normal troubleshooting is the noticeable decrease in forward speed. It could be caused by the adjustment of drive pedal, which could be out. Adjust drive pedal and problem will be gone. The same to the clutch adjustment, if you notice that it is wrong adjusted, adjust clutch.
Automatic drive/variable speed riding mowers
With this kind of mowers, two main possible problems can occur. One is when the mower will is not driving, due to shift lever not in drive selection. It can be solved by making sure that shift lever is in drive selection. Another possible cause is when Axle key is missing, if so just replace the axle. Next possible cause and most common one is when the variable speed pulley is damaged, replace pulley but asking first to authorized service. Speed riding lawn mowers also could get down by noticing a decrease in forward speed. The best solution will be to replace pulley due to the variable speed pulley is damaged.
These small overview on troubleshooting have been experienced by customers and fixed by experts and service centers, so as we have said above, if we get any possible doubt checking our, go to the service center, or local dealer, do not try to solve the problem by your own, is a the best suggestion for lawn mower troubleshooting.
|
